B-Thin glass tempering system
Glass thickness--From 2.5mm to 19mm
Pass-through chiller is designed to save quenching power and temper thin glass at full load with limited fan power.
In case of super-thin (1/8” minus, thin glass models only) glass tempering furnace, the pass-through zone(s) is further divided into more sub-zones to create a pressure gradient so as to improve quenching power concentration. With limited quenching power, the furnace can temper super thin glass at full load.
Chillers that can temper super thin glass have high-stream nozzles in high pressure zone(s). Such nozzles can produce concentrated air streams to create very rapid quenching effect.
Basic Technical Data of DTB Glass Tempering Lines
Model | Max. Glass Size (mm) | Min Glass Size (mm) | Glass Thickness (mm) | Production Rate (5mm,batch/hour) | |
PG1224DTB | 1220x2440 | 100 x 300 | 3 ~ 19 | 18.2 | |
PG1524DTB | 1525x2440 | 100 x 300 | 3 ~ 19 | 18.2 | |
PG1530DTB | 1525x3050 | 100 x 300 | 3 ~ 19 | 18 | |
PG1536DTB | 1525x3660 | 100 x 300 | 3 ~ 19 | 17.8 | |
PG1830DTB | 1830x3050 | 100 x 350 | 3 ~ 19 | 18 | |
PG1836DTB | 1830x3660 | 100 x 350 | 3 ~ 19 | 17.8 | |
PG2136DTB | 2135x3660 | 100 x 350 | 3 ~ 19 | 17.8 | |
PG2142DTB | 2135x4270 | 100 x 350 | 3 ~ 19 | 17.6 | |
PG2150DTB | 2135x5000 | 100 x 350 | 3 ~ 19 | 17.4 | |
PG2436DTB | 2440x 3660 | 100 x 350 | 3 ~ 19 | 17.8 | |
PG2442DTB | 2440x4270 | 100 x 350 | 3 ~ 19 | 17.6 | |
PG2550DTB | 2500x5000 | 100 x 350 | 3 ~ 19 | 17.4 | |
PG2560DTB | 2500x6100 | 100 x 350 | 3 ~ 19 | 17.1 |
Data shown here are for sales reference only and have no contractual obligations.